Chalkline Floors
Hardwood floors laid and refinished across Salt Lake City
Salt Lake City, Utah — since 2006
Scroll
Family-owned since 2006
Free in-home estimate
Call or text (801) 555-0137
About us
Every floor starts with one straight line.
Arne Sundquist snapped his first chalk line in a Sugar House bungalow in 2006. Twenty years on, his daughter Britt runs the estimates, our own crews sand every floor, and every job still starts the same way: one blue line, snapped straight off the longest wall, that the whole room is measured from.
Eleven people, four crews, and nobody subbed out. Licensed and insured in Utah, family-owned since 2006.
Book a walk-through
[a]
Dustless, every job
Every sander runs into a HEPA vacuum. You'll find a film on a windowsill, not a cloud through the house.
[b]
Samples on your boards
Seven house stains, brushed onto your own floor at the walk-through, so you choose in your own light.
[c]
A quote in 24 hours
A written quote within a day of the walk-through, room by room, so you know the number before we start.
Services
Sanded, stained or laid new.
2026 starting prices for a typical Salt Lake home. Your written quote is exact, room by room.
01
Sand & refinish
Dustless sanding to bare wood in three grits, one stain color, three coats of waterborne finish.
from $4.50/sq ft
02
New hardwood, installed
Solid oak, maple, hickory or walnut, nailed down and finished on site, so the stain and the sheen are yours.
from $9/sq ft
03
Engineered floors
Wide-plank engineered boards, glued down or floated, for basements, condos and anywhere solid wood shouldn't go.
from $7/sq ft
04
Stair treads
Treads and risers refinished, or new white oak treads cut to your stairs.
from $45/step
05
Board repair
Pet stains, water damage, gaps and cracked boards: matched boards woven in and blended into the floor.
from $275
06
Screen & recoat
A fresh topcoat on a finish that's worn but sound. No sanding, done in a day.
from $1.75/sq ft
Stain colors
Seven house stains. Tried on your boards.
The same stain reads warmer on 1950s red oak than on new white oak, so we brush samples onto your own floor and let you pick in daylight.
Raw
No stain
Salt Flat
Whitewash
Driftwood
Gray brown
Honey
Golden
Saddle
Warm brown
Walnut
Deep brown
Espresso
Near black
Each sample brushed on white oak, satin finish
How it works
Four steps. Measured twice.
A typical 600 sq ft refinish takes 3–4 days, from the first sheet of plastic to the felt pads under your chairs.
600 sq ft — 3 to 4 days
Book the walk-through
01
Walk-through
Free
In your home. We measure every room, read the moisture in the boards and brush stain samples on your floor. A written quote follows within 24 hours.
02
Prep
Day 1
Doorways and vents sealed in plastic, cabinets and baseboards covered, ordinary furniture moved out of the rooms. Pianos and safes need movers.
03
Sand & finish
Days 1–3
Dustless sanding in three grits, then your stain, then three coats of low-odor waterborne finish.
04
Cure & walk-through
Day 4
Socks on the floor after 24 hours, furniture back after 72, rugs after two weeks. We walk the floor with you and leave felt pads for every chair.
640 sq ft of red oak
Before & after
Under the carpet, 1948 red oak.
Home
1948 bungalow, Sugar House
Floor
2¼-inch red oak, under carpet
Area
640 sq ft
Work
Sanded to bare wood, stained Saddle, three coats of satin
Time
Four days
By the numbers
Twenty years of Salt Lake floors, one family.
20
Years on Salt Lake floors
3,200+
Floors sanded or laid
4.9
Rating from 410 reviews
24 hr
Walk-through to written quote
Sugar House
The Avenues
Holladay
Millcreek
Cottonwood Heights
Murray
Sandy
Draper
Bountiful
Park City
Reviews
4.9
From 410 reviews
“They found 1940s oak under our carpet and made it look like it was laid last week. And there was honestly no dust.”
Megan, Sugar House
“Britt brushed six stains on our own boards and left them for the weekend. We picked one by Monday, and they started Wednesday.”
Tom and Ana, Holladay
“The dishwasher leaked and ruined four boards by the sink. They wove in new ones, and I can't find the seam.”
Priya, Draper
FAQ
Asked at every walk-through.
Something else on your mind? Call or text (801) 555-0137 and we'll answer it.
How long will we be out of the room?
A 600 sq ft refinish takes 3–4 days. Socks on the floor after 24 hours, furniture back after 72, rugs after two weeks.
Is dustless really dustless?
Close. Every sander runs into a HEPA vacuum, and we seal the doorways anyway. You'll find a film on a windowsill, not a cloud through the house.
Should we refinish or replace?
Solid ¾-inch boards can be sanded many times over. Engineered boards depend on their wear layer: we'll measure it at the walk-through and tell you straight.
Can you match our existing floor?
Species, width and stain. We weave the new boards in, then refinish the whole room so it reads as one floor.
Do you work through the winter?
All year. Utah's air is dry, so new boards sit in your house for 3–5 days first, and we check their moisture before they go down.
Free estimate
Samples first. Then a price.
Britt comes out with a tape, a moisture meter and seven stains, brushes samples onto your own boards, and sends a written quote within 24 hours. No charge, no pressure.
Call or text
(801) 555-0137
hello@chalklinefloors.com
Mon–Fri
7am–5pm
Sat
8am–noon
Sun
Closed
Request a free walk-through
We'll text you within one business day to set a time.
Request my estimate